Explosion-proof intercom terminal YD-12S

  • Compatible with standard SIP (RFC3261) protocol, can connect to mainstream IP PBX/IMS platforms
  • Uses H.264 encoding *The device comes in an aluminum alloy explosion-proof casing and can optionally be mounted on a vertical pole.
  • * Internally equipped with one line audio input and one line audio output, suitable for emergency calls and special amplification in places like safe city areas and tunnels.
  • * Built-in media playback software for supporting use;
  • * The panel has a high-sensitivity intercom microphone, making it easy for the person in need to have a conversation.
  • * Equipped with a 5W speaker so that the person needing help can hear the intercom even in noisy and chaotic road environments.
  • * Internally equipped with a fixed 8Ω/30W (can be custom 60W) digital amplifier to meet power amplification needs in different scenarios like roads or tunnels. Optionally, external high-fidelity passive speakers or long-distance horns can be connected.
  • * Both the module and background music module use Class D digital amplifiers with independent switch-mode power supply. It stays muted when there is no broadcast or emergency call, making the device quieter with less heat.
  • * Internally equipped with a DC12V controllable power supply for driving warning lights and other alerting devices.
  • * Internally equipped with a high-quality TCP/IP network module
  • Protection level: IP65;
  • Network interface: RJ45;
  • Network transmission rate: 100Mbps;
  • Supported protocols: RTP, UDP, TCP/IP, FTP;
  • Audio formats: MP3/WAV;
  • Audio quality: 16-bit CD quality;
  • Sampling rate: 8K–41.8KHz;
  • MIC input sensitivity: 10mV;
  • Frequency response: 317Hz–3.4KHz;
  • Total power consumption: 10W;
  • Total harmonic distortion THD: ≤10%;
  • Signal-to-noise ratio: ≥80dB;
  • Operating temperature: -20℃–60℃;
  • Operating humidity: 20%–80% RH, no condensation;
  • Input power: DC12V;
  • Dimensions: 230*230*110mm;
  • Weight: 1.7Kg;